Purpose and scope of this document:

This document provides specific operational considerations that healthcare settings and healthcare authorities can review in the context of global supply shortages of personal protective equipment (PPE), to help with decision making in order to provide needed surge capacity during the COVID-19 response.

This document draws from CDC strategies for US-healthcare settings on COVID-19: Strategies for Optimizing the Supply of PPE | CDC and includes potential strategies that may be considered in non-US contexts.

This document should be reviewed alongside WHO’s guidance on the Rational use of personal protective equipment for coronavirus disease 2019 (COVID-19)pdf icon which defines strategies to optimize the availability of PPE and options for temporary measures during severe shortage of PPE.

High-level and continued efforts will be needed to maintain and scale-up the PPE supply chain to ensure availability of PPE in healthcare settings where it is needed, to avoid supply shortages, and allow adherence to IPC standard practice.

Wherever possible, emergency PPE strategies should not be used in hospital wards housing severe or critically ill patients with COVID-19, as well as those with known co-infections of multi-drug resistant or other organisms transmitted by contact (e.g., Klebsiella pneumoniae) or droplet (e.g., influenza virus).

Consideration of these strategies assumes that:

  • Facilities are in communication with local public health partners such as public health emergency preparedness and response staff and sub-national and national authorities regarding identification of additional supplies.
  • Facilities understand their inventory and utilization rate – see: Personal Protective Equipment (PPE) Burn Rate Calculator | CDC
  • Facilities have already implemented other engineering and administrative control measures for patients with COVID-19, including:
    • Reducing or cancelling elective surgical procedures and non-critical/ non-urgent outpatient visits
    • Reducing face-to-face healthcare worker (HCW) encounters with patients
    • Limiting the number of visitors to healthcare facilities
    • Cohorting patients and HCWs
  • Facilities have provided HCWs with required education and training, including having them demonstrate competency in donning and doffing with all PPE required for direct care of patients with COVID-19 and other job functions – see: WHO | HOW TO PUT ON AND TAKE OFF Personal Protective Equipment (PPE)external icon

Structure of the document:

This document is organized by the type of PPE indicated for use in direct clinical care of suspected or confirmed patients with COVID-19. Medical masks, gowns and eye protection are addressed within this document, due to widespread supply shortages. Respirators are only described briefly, with references to other sources of information where available. Finally, examination gloves are not addressed within this document; the use of examination gloves should always adhere to standard IPC practice.

For each type of PPE, a brief description is provided as well as operational considerations under each of several potential strategies for scenarios of:

  1. Limited supplies: where recommended PPE for direct clinical care is still available, but the supply is insufficient to enable full adherence to standard IPC practice. Strategies to conserve supplies under this scenario include:
    • Extended use: by one HCW among multiple patients with COVID-19 (one donning and doffing)
    • Reuse: by one HCW among multiple patients with COVID-19 (multiple donning and doffing)
  1. No PPE available: where recommended PPE for direct clinical care is NOT available, in the context of acute supply shortages. Strategies under this scenario include potential alternatives to recommended PPE as a last resort during a crisis where standard PPE is not available.

General Strategies:

Considerations in the context of limited supplies:

Using reusable PPE where options exist such as cloth gowns and reusable goggles.

Using PPE beyond the manufacturer-designated shelf life or expiration date for a limited time.  

 

PPE-Specific Strategies:

Medical Masks

Medical masks (also known as surgical masks or medical facemasks): Medical masks reduce the transfer of saliva and respiratory droplets to others and help block blood and other potentially infectious materials from the skin, mouth, or nose of the wearer. Medical masks may or may not have some level of fluid-resistance and do not seal tightly to the wearer’s face. They have multiple layers of different nonwoven fabric materials, which are fused together. They are available in different thicknesses and with different ability to protect from contact with splashes and droplets. They are designed for single-use and will deteriorate with prolonged use, exposure to moisture and exposure to standard levels of disinfection such as chemicals, heat, and radiation.  EU MDD Directive 93/42/EEC Category III or equivalent, EN 14683 Type II, IIR, ASTM F2100 minimum Level 1 or equivalent are indicated for use for direct clinical care of patients with COVID-19.

1) Limited Supplies

Extended use: Extending use of medical masks for one HCW to use on multiple patients with COVID-19 (multiple single-rooms when seen in succession or cohort of patients) during a single shift.

Reuse:  Reprocessing and reusing medical masks for one HCW to use on multiple patients with COVID-19 for a limited time-period (multiple shifts).

2) No Medical Masks Available

Potential alternatives: Using 1) a face shield only or 2) a combination of a non-medical, approved fabric mask and face shield.

Gowns

Gowns: Non-sterile, long-sleeved hospital gowns (isolation gowns or surgical gowns) are indicated for use for direct care of patients with COVID-19. These are available in both disposable and reusable options. Disposable gowns are generally made of a spun bound synthetic material. Reusable (washable) gowns are typically made of cotton or cotton-blend fabrics; gowns made of these fabrics can be safely laundered and reused if they are in good condition.

1) Limited Supplies

Extended use:  Extending the use of gowns (disposable or reusable options) for one HCW to use on multiple patients with COVID-19 (multiple single-rooms when seen in succession or cohort of patients) during a single shift.

For additional reprocessing guidance for reusable gowns, see: Environmental Cleaning in Resource-Limited Settings | HAI | CDC

2) No Gowns Available

Potential alternatives:

  • Disposable aprons
  • Disposable laboratory coats
  • Reusable (washable) patient gowns, reusable (washable) laboratory coats
  • Combinations of clothing such as sleeve covers in combination with aprons and long sleeve patient gowns or laboratory coats
  • This strategy is not consistent with standard practice and therefore not recommended, but if adopted:
    • The selection of potential alternatives should take into consideration the availability of these alternatives and their attributes, such as impermeability and user comfort, and whether enough are available to allow frequent replacement.
    • The alternatives should be removed using appropriate technique for either reprocessing or disposal following local protocols whenever needed such as when they become (e.g., when moist, visibly soiled, or damaged) and upon exiting the isolation area following standard practice.

Eye Protection

Goggles: Goggles provide barrier protection for the eyes. They should fit tightly over and around the eyes or personal prescription lenses, be indirectly vented (to prevent penetration of splashes or sprays) and have an anti-fog coating to help maintain clarity of vision. The lens is made of plastic, commonly polycarbonate, and there is an adjustable elastic strap to allow snug fit around the eyes. Goggles used for healthcare applications are typically reusable.

Face shields: Provide barrier protection to the facial area and related mucous membranes (eyes, nose, lips) and are considered an alternative to goggles. Face shields are not meant to function as primary respiratory protection and should be used concurrently with a medical mask (for droplet precautions) or a respirator (for airborne precautions) if aerosol-generating procedure is performed. They should cover the forehead, extend below the chin, and wrap around the side of the face. Face shields are available in both disposable and reusable options.

1) Limited Supplies

Extended use:  Extending the use of goggles or face shields (disposable or reusable) for one HCW to use on multiple patients with COVID-19 (multiple single-rooms when seen in succession or cohort of patients) during a single shift.

  • This strategy is not consistent with standard practice and therefore not recommended, but if adopted:
    • If eye protection becomes visibly soiled, it should be removed using appropriate technique and sent for reprocessing or disposal following local protocols (followed by appropriate donning of a new set of eye protection) before moving to another patient.
    • If eye protection is removed for any other reason such as taking a break or completing a shift, it should be sent for reprocessing or disposed following local protocols.

Reuse:

  1. Reprocessing and reusing disposable face shields for one HCW to use on multiple patients with COVID-19 for a limited time-period (multiple shifts).
  • This strategy is not consistent with best practices and therefore not recommended, but if adopted:
    • A face shield should be dedicated to one HCW.
    • They should be immediately reprocessed when they are visibly soiled, whenever they are removed such as when leaving the isolation area, and at least daily (after every shift) prior to putting them back on (See reprocessing guidance below).
    • After reprocessing, a face shield should be stored in a transparent plastic container and labeled with the HCW name to prevent accidental sharing between HCW.
  • Note: The number of times a disposable face shield could potentially be reprocessed is unknown; therefore, face shields should be closely examined prior to each reuse to ensure the integrity of the foam pad, elastic strap, and clarity of the visor.
  1. Dedicating a supply of reusable goggles or face shields to an isolation area (with one or more patients with COVID-19 in single-rooms or a cohort of patients) for multiple HCWs to use throughout one shift.
  • This strategy is not consistent with standard practice and therefore not recommended, but if adopted:
    • Items should be reprocessed after each use and stored at the entry to the isolation area, in a dedicated area equipped for reprocessing adjacent to the isolation area (dirty and clean storage area) (See reprocessing guidance below).

Disinfectant Product Options

Considerations / Additional Guidance

  1. Carefully wipe the inside and then the outside of the visor using a clean cloth saturated with neutral detergent solution, rinse if needed.
  2. Carefully wipe the outside of the visor using a clean cloth or wipe saturated with hospital disinfectant solution; be sure it remains wet for the required contact time.
  3. Wipe the outside of visor with clean water to remove residue.
  4. Fully dry (air dry or use clean absorbent towels).

Disinfectant Product Options

Chlorine-based disinfectant (0.1% chlorine solution) recommended over alcohol, as alcohol may damage and discolor plastic and deteriorate glues over time; note that it may also remove anti-glare and anti-fogging properties of the face shield.

See guidance on how to prepare 0.1% chlorine solutionpdf icon.

Considerations / Additional Guidance

The emphasis of reprocessing should be on the outside of the visor.

Carefully avoid the foam cushion and elastic strap as they may not be tolerant to disinfectants.

Note: If reprocessing disposable face shields on a time-limited basis, they should be dedicated to one HCW.

Reusable goggles or face shield

  1. Immerse in or wipe with neutral detergent and warm water solution, use mechanical action to remove any visible soiling, then quickly rinse with clean water; rinse if needed.
  2. Immerse in or wipe with hospital disinfectant solution for the required contact time.
  3. Rinse with clean water (sink if available or by immersing in a bucket of clean water) to remove any residue.
  4. Fully dry (air dry or use clean absorbent towels).

Disinfectant Product Options

Manufacturers should be consulted for their guidance and experience in disinfecting their respective products.

Considerations / Additional Guidance

Chlorine-based disinfectant (0.1% chlorine solution) recommended over alcohol as alcohol may damage and discolor plastic and deteriorate glues over time; note that it may also remove anti-glare and anti-fogging properties of the eye protection.

Note: Solutions must be regularly replaced as they will quickly become contaminated.

See guidance on how to prepare 0.1% chlorine solution.

2) No Goggles or Face Shields Available

Potential alternatives: Using safety glasses such as trauma glasses

  • This strategy is not consistent with standard practice and therefore not recommended, but if adopted:
    • The selection of potential alternatives should include those that have extensions to cover the side of the eyes.

Procedure-specific PPE:

Respirators

Respirators: Provide protection against inhalation of very small infectious airborne particulates using a filtering facepiece respirator (FFR).  N95, FFP2, P2 or equivalent standard particulate respirators are indicated for use in patients with COVID-19.

1) Limited Supplies

Extended use: Extending use of FFRs for one HCW to use on multiple COVID-19 patients (multiple single-rooms when seen in succession or cohort of patients) during a single shift.

  • This strategy is not consistent with standard practice and therefore not recommended, but if adopted:
    • Consult published documents on this strategy:
    • The potential number of hours of extended use would be dependent on local and individual factors such as humidity and shift length. In practice, this would likely be a maximum of six hours.

Reuse:  Reprocessing and reusing FFRs for one HCW to use for a limited time-period (multiple shifts).

  • This strategy is not consistent with standard practice and therefore not recommended, but if adopted:
  • Note: At present, there are no CDC and/or NIOSH-approved methods for FFR decontamination prior to reuse.
  • Note: Many of the most promising methods are resource-intensive and may not be feasible in many low- and middle-income countries.



View Original Publication